Tööriistakäru Granit Black Edition, 197 tööriista

1184.00 +km

Tööriistakäru Granit Black Edition pakub lisaks ilusale välimusele ka ülimat kasutajasõbralikkust ja funktsionaalsust.

8 sahtlit, kandevõimega kuni 30 kg, võimaldavad tööriistu mugavalt hoiustada ja kasutada.

2 lukustatud ja 2 pöörleva ratta abil saab tööriistakäru lihtsa vaevaga soovitud kohta liigutada.

Tööriistakäru sisaldab järgmisi tööriistu:

• 1/4″ square screwdriver, 150 mm
• 1/4″ reversible ratchet, 72 teeth
• 1/2″ reversible ratchet, 72 teeth
• 1/4″ hexagon socket, 4/4.5/5/5.5/6/7/8/9/10/11/12/13/14 mm
• 1/4″ hexagon socket, long, 4/5/6/7/8/9/10 mm
• 1/4″ bit socket, hexagonal, 3/4/5/6 mm
• 1/4″ bit socket, slotted, 4/5.5/6.5/7 mm
• 1/4″ bit socket, PH1/PH2/PH3
• 1/4″ bit socket, PZ1/PZ2/PZ3
• 1/4″ bit socket, Torx, T8/T9/T10/T15/T20/T25/T27/T30
• 1/4″ bit socket, Torx with face hole, TB8/TB9/TB10/TB15/TB20/TB25/TB27/TB30
• 1/4″ Torx E socket, E4/E5/E6/E7/E8
• 1/4″ bit adaptor socket, with clamping ring
• 1/2″ hexagon socket, 10/11/12/13/14/15/16/17/18/19/20/21/22/24/27/30/32 mm
• 1/2″ hexagon socket, long, 13/17/19/22/24 mm
• 1/2″ Torx E socket, E20/E24
• 1/2″ bit adaptor socket, 1/2″ x 5/16″, 38 mm
• 1/2″ socket for spark plugs, 21 mm
• 1/4″ extension adaptor, 1/4″Fx3/8″M
• 3/8″ slide/enlargement adaptor
• 1/4″ extension, 50/100 mm
• 1/2″ extension, 125/250 mm
• 1/4″ universal joint
• 1/2″ universal joint
• 1/4” T-handle with slide, 110 mm
• 1/2″ socket for spark plugs, 16 mm
• Double open-ended spanners, 6×7/8×9/10×11/12×13/14×15/16×17/18×19/21×23/24×27 mm
• Combination spanners, angled, 6/7/8/9/10/11/12/13/14/15/16/17/18/19/22/24/27/30/32 mm
• Screwdrivers with striking cap PH1/PH2
• Slotted screwdrivers with striking cap 4/5.5/6.5/8 mm
• TX screwdrivers, T10/T15/T20/T25/T27/T30
• 1/4″ bit set, 32 pcs.
• TX key set, 9 pcs.
• Hex key set, 10 pcs.
• Hook tool, straight/angled 90°/angled 45°/curved 135°
• Fitter’s hammer 500/1000 g
• Chisel and pin punch set, 6 pcs.
• Tape measure, 5 m
• Calipers 0-150 mm
• Knife
• Replacement blade box
• Flat file, form B, 200 mm, cut 2
• Round file, form F, 200 mm, cut 2
• Semicircular file, form E, 200 mm
• Square file, form D, 200 mm
• Triangular file, form C, 200 mm
• Water pump pliers, quick adjustment, 250/300 mm
• Needle nose pliers, 200 mm
• Combination pliers, 180 mm
• Side cutters, 160 mm
• Gripping pliers, 55 mm, L: 175 mm
• Circlip pliers, straight, for shafts Ø 19 – 60 mm
• Circlip pliers, angled 90°, for shafts Ø 19 – 60 mm
• Circlip pliers, straight, for holes Ø 19 – 60 mm
• Circlip pliers, angled 90°, for holes Ø 19 – 60 mm
• Nippers, 280 mm

Laost otsas